Stereotaxic Holders
Model 1770 Standard Electrode Holder
Model 1770 Standard Electrode Holder with Corner Clamp is supplied with all manipulators unless otherwise specified. Holds electrodes of .4 mm to 1.3 mm diameter. Model 1778 is modified with longer shaft 22.23 cm.
Model 1771 Electrode Holder with Straight Clamp
Model 1771 Electrode Holder with Straight Clamp holds electrodes from 0.4 mm to 3.8 mm diameter.
Model 1771-A-Mod Electrode Holder with Straight Clamp modified with pad holds electrodes/glass from .092 to 2.325 mm diameter.
Model 1773 Electrode Holder with Removable Open Side Clamp
Model 1773 Electrode Holder with Removable Open Side Clamp is useful for chronic work when cementing electrodes. Holds electrodes of 0.4 mm to 3.6 mm diameter.
Model 1774 Wedge Holder with Removable Flag
Model 1774 Wedge Holder with Removable Flag is used for cementing electrodes to a plastic flag that is held with a tapered clamp. Unique design allows several electrodes to be placed close together.
Model 1769 90° Electrode Holder
Model 1769 90° Electrode Holder utilizes the same standard electrode holder with corner clamp as the Model 1770, but is mounted so that the electrode protrudes 90°. Holds electrodes from 0.4 mm to 1.3 mm diameter.
Model 1768 Micrometer Adjustable Electrode Holder
Model 1768 Micrometer Adjustable Electrode Holder allows micrometer axial control of the electrode. It holds electrodes from .75 mm to 1.5 mm diameter. Micrometer extending 5.5 mm.
Model 1766-AP Cannula Holder is designed to hold a wide variety of guide cannulas, manufactured by Alzet and Plastics One. Holds 3.5 mm diameter pedestal.
Model 1776-P1 Cannula Holder is designed to hold a wide variety of guide cannulas manufactured by Alzet and Plastic One. Recommended for bilateral cannula placement. Holds 3.5 mm diameter pedestal.
Model 1776-P2 Dual Adjustable Cannula Holder
Model 1776-P2 Dual Adjustable Cannula Holder is designed to provide accurate placement of two guide cannulas simultaneously. For use with Alzet or Plastics One cannula.
Model 1776 Custom Holder has a stainless steel end with a set screw. Holder is custom drilled to hold specific items (i.e. electrode, guide cannula), hole sizes available from 1.5 mm to 6 mm. Hole size must be specified at time of order. A sample cannula or electrode is requested at time of order.
Model 1779 Cannula Holder is designed to hold a variety of guide cannulas manufactured by CMA Microdialysis.
Model 1772 Universal Holder places syringes, large diameter electrodes or drill handpieces stereotaxically. It holds devices from 2.4 mm to 11 mm diameter.
Model 1772-F Universal Holder with Needle Support Foot
Model 1772-F Universal Holder with Needle Support Foot is designed specifically to hold Hamilton syringes and features our Model 1772 Universal Holder with needle support foot for stabilizing the syringe needle tip.