Model 1970 Electrode Holder is custom adapted to your specific research requirement. The holder is designed to hold a specific diameter for maintaining an exact common vertical centerline position. A specified diameter or  sample electrode is requested at time of order.

All tools manufactured for use with our stereotaxic alignment system include an auto-indexing tool adapter mounting block for maintaining exact common vertical centerline position tool-to-tool.

Der Beitrag Model 1970 Electrode Holder erschien zuerst auf Bilaney Consultants.

Model 1776 Custom Holder has a stainless steel end with a set screw. Holder is custom drilled to hold specific items (i.e. electrode, guide cannula), hole sizes available from 1.5 mm to 6 mm.

Hole size must be specified at time of order. Specific hole size requireiments or a sample cannula or electrode is requested at time of order.

Der Beitrag Model 1776 Heavy-Duty Electrode Holder (Custom Hole Size) erschien zuerst auf Bilaney Consultants.

Model 1776-P2 Dual Adjustable Cannula Holder is designed to provide accurate placement of two guide cannulas simultaneously. For use with Alzet or Plastics One cannula.

Minimum cannula distance is 3.6 mm
Maximum cannula distance is 15.6 mm
(cannula centerline to cannula centerline)
Maximum Cannula body distance 12 mm

Dual vernier scales allow accurate movement of as little as 0.1 mm over the full 12.0 mm length of adjustment. Holds 3.5 mm diameter pedestal.

Der Beitrag Model 1776-P2 Dual Cannula Holder (Alzet & Plastics One) erschien zuerst auf Bilaney Consultants.

Model 1972 Syringe Holder is designed to stabilize and position a Hamilton 7000.5 and 7001 series microliter syringe during stereotaxic surgery. Unit can be used with Hamilton 75, 700 and 1701 microliter syringes but longer syringe needles are required. The adjustable needle guide tube supports the needle barrel for accurate alignment. Only the length of needle required to penetrate the brain is exposed during surgery.

All tools manufactured for use with our stereotaxic alignment system include an auto-indexing tool adapter mounting block for maintaining exact common vertical centerline position tool-to-tool.

Der Beitrag Model 1972 Syringe Holder erschien zuerst auf Bilaney Consultants.

Model 1769 90° Electrode Holder utilizes the same standard electrode holder with corner clamp as the Model 1770, but is mounted so that the electrode protrudes 90°. Holds electrodes from 0.4 mm to 1.3 mm diameter.  Model 1270-C Corner Clamp is included.

Recommended for CSF collection, 90 degree presentation of glass pipette ideal for this application.  Model 1271-C-MOD Straight Clamp with pad required.  Price quoted upon request.

Models 1769, 1770, 1771, 1773 and 1778 have precision molded plastic block with serrated grooves 1 mm apart. These separations are on three sides to facilitate loading of electrodes. Clamping design allows more than one electrode to be held on one side of the holder.

Der Beitrag Model 1769 90° Electrode Holder erschien zuerst auf Bilaney Consultants.

Model 1776-P1 Cannula Holder is designed to hold a wide variety of guide cannulas manufactured by Alzet and Plastic One. Recommended for bilateral cannula placement. Holds 3.5 mm diameter pedestal.

Der Beitrag Model 1776-P1 Cannula Holder (Alzet & Plastics One) erschien zuerst auf Bilaney Consultants.

Model 1779 Cannula Holder is designed to hold a variety of guide cannulas manufactured by CMA Microdialysis.

Der Beitrag Model 1779 Cannula Holder (CMA) erschien zuerst auf Bilaney Consultants.

Model 1766-AP Cannula Holder is designed to hold a wide variety of guide cannulas, manufactured by Alzet and Plastics One. Holds 3.5 mm diameter pedestal.

Der Beitrag Model 1766-AP Cannula Holder (Alzet & Plastics One) erschien zuerst auf Bilaney Consultants.

Model 1772 Universal Holder places syringes, large diameter electrodes or drill handpieces stereotaxically. It holds devices from 2.4 mm to 11 mm diameter.

Der Beitrag Model 1772 Heavy-Duty Universal Holder erschien zuerst auf Bilaney Consultants.

Model 1774 Wedge Holder with Removable Flag is used for cementing electrodes to a plastic flag that is held with a tapered clamp. Unique design allows several electrodes to be placed close together.

Der Beitrag Model 1774 Heavy-Duty Wedge Holder with Removable Flag erschien zuerst auf Bilaney Consultants.